Description
Immersion sleeve made of nickel-plated brass with screw-in thread G 1/2″.
- For immersion and duct temperature sensors with Ø6.0 mm
- Special lengths on request
Immersion sleeve made of nickel-plated brass with screw-in thread G 1/2″.
Immersion sleeve made of nickel-plated brass with screw-in thread G 1/2″.
| Screw-in thread | G 1/2" |
|---|---|
| Key-width | SW 27 |
| Dimensions/Maße | Outer diameter tube approx. 8.0 mm Installation length incl. thread 100.0 mm |
| Clamping SKT | Locking screw |
| Pressure range | max. 16 bar |
| Operation temperature/Einsatztemperatur | -40 …+400 °C |
| Weight/Gewicht | 102 g |
Thanks to our competence in the development of electronic components, the function and design of OEM products can be adjusted to your needs individually. Direct cooperation with our production and its knowledge in plastics processing, equipment and assembly enables customised solutions for you: from customer-specific labels to individual product housings, to special cable lengths.
Empty housing for surface mounting with top-hat rail, transparent cover and flange plate for cable bushings.
Plastic mounting flange for sensors with a Ø12.0 mm sensor tube.
Plastic mounting flange for sensors with a Ø6.0 mm sensor tube.
Plastic mounting flange for sensors with a Ø12.0 mm sensor tube.
Plastic mounting flange for sensors with a Ø4.0 mm sensor tube.
Immersion sleeve made of stainless steel with screw-in thread G 1/2″.
Immersion sleeve made of stainless steel with screw-in thread G 1/2″.
Immersion sleeve made of stainless steel with screw-in thread G 1/2″.
Immersion sleeve made of nickel-plated brass with screw-in thread G 1/2″.
Immersion sleeve made of stainless steel with screw-in thread G 1/2″.
Immersion sleeve made of nickel-plated brass with screw-in thread G 1/2″.
Immersion sleeve made of nickel-plated brass with screw-in thread G 1/2″.
Application humidity/temperature and VOC with sintered filter cap.
Application humidity/temperature with sintered filter cap.
External temperature and humidity sensor for retrofitting.
The PoE Injector adds a 24 V voltage to the existing Ethernet cable so that only one cable is required for connection to PoE-capable HMI-WEB7 devices.
Connection box with DIN top hat rail.
Self-adhesive paper label for labeling front foils on devices.
microSD card with 8 GB storage capacity and adapter for industrial use in an E-DDC.
Just fill in your details — your download will start immediately
